（一）获得网卡接口。在普通的SOCKET编程中，对双网卡编程是不行的。当主机为双网卡时，本程序可分别获得两张网卡各自的描述结构及地址，然后可以对它们分别进行操作。返回的alldevs队列首部为逻辑网卡，一般不对它进行什么操作。
＃include "pcap.h"
void main()
{
pcap_if_t *alldevs;
/*struct pcap_if_t{
pcap_if_t *next;
char *name;
char *description;
pcap_addr *addresses;
U_int falgs;
}
*/
pcap_if_t *d;
int i=0;
char errbuf[PCAP_ERRBUF_SIZE];
/* Retrieve the device list */
if (pcap_findalldevs(&alldevs, errbuf) == -1)//返回网卡列表，alldevs指向表头
{
fprintf(stderr,"Error in pcap_findalldevs: %s\n", errbuf);
exit(1);
}
/* Print the list */
for(d=alldevs;d;d=d->next)
{
printf("%d. %s", ++i, d->name);
if (d->description)
printf(" (%s)\n", d->description);
else printf(" (No description available)\n");
}
if(i==0)
{
printf("\nNo interfaces found! Make sure WinPcap is installed.\n");
return;
}
/* We don't need any more the device list. Free it */
pcap_freealldevs(alldevs);
}
（二）。抓包啦。本程序俘获局域网内UDP报文。
＃i nclude "pcap.h"
/* 4 bytes IP address */
typedef struct ip_address{
u_char byte1;
u_char byte2;
u_char byte3;
u_char byte4;
}ip_address;
/* IPv4 header */
typedef struct ip_header{
u_char ver_ihl; // Version (4 bits) + Internet header length (4 bits)
u_char tos; // Type of service
u_short tlen; // Total length
u_short identification; // Identification
u_short flags_fo; // Flags (3 bits) + Fragment offset (13 bits)
u_char ttl; // Time to live
u_char proto; // Protocol
u_short crc; // Header checksum
ip_address saddr; // Source address
ip_address daddr; // Destination address
u_int op_pad; // Option + Padding
}ip_header;
/* UDP header*/
typedef struct udp_header{
u_short sport; // Source port
u_short dport; // Destination port
u_short len; // Datagram length
u_short crc; // Checksum
}udp_header;
/* prototype of the packet handler */
void packet_handler(u_char *param, const struct pcap_pkthdr *header, const u_char *pkt_data);
main()
{
pcap_if_t *alldevs;
pcap_if_t *d;
int inum;
int i=0;
pcap_t *adhandle;
char errbuf[PCAP_ERRBUF_SIZE];
u_int netmask;
char packet_filter[] = "ip and udp";
struct bpf_program fcode;
/* Retrieve the device list */
if (pcap_findalldevs(&alldevs, errbuf) == -1)
{
fprintf(stderr,"Error in pcap_findalldevs: %s\n", errbuf);
exit(1);
}
/* Print the list */
for(d=alldevs; d; d=d->next)
{
printf("%d. %s", ++i, d->name);
if (d->description)
printf(" (%s)\n", d->description);
else
printf(" (No description available)\n");
}
if(i==0)
{
printf("\nNo interfaces found! Make sure WinPcap is installed.\n");
return -1;
}
printf("Enter the interface number (1-%d):",i);
scanf("%d", &inum);
if(inum < 1 || inum > i)
{
printf("\nInterface number out of range.\n");
/* Free the device list */
pcap_freealldevs(alldevs);
return -1;
}
/* Jump to the selected adapter */
for(d=alldevs, i=0; i< inum-1 ;d=d->next, i++);
/* Open the adapter */
if ( (adhandle= pcap_open_live(d->name, // name of the device
65536, // portion of the packet to capture.
// 65536 grants that the whole packet will be captured on all the MACs.
1, // promiscuous mode
1000, // read timeout
errbuf // error buffer
) ) == NULL)
{
fprintf(stderr,"\nUnable to open the adapter. %s is not supported by WinPcap\n");
/* Free the device list */
pcap_freealldevs(alldevs);
return -1;
}
/* Check the link layer. We support only Ethernet for simplicity. */
if(pcap_datalink(adhandle) != DLT_EN10MB)
{
fprintf(stderr,"\nThis program works only on Ethernet networks.\n");
/* Free the device list */
pcap_freealldevs(alldevs);
return -1;
}
if(d->addresses != NULL)
/* Retrieve the mask of the first address of the interface */
netmask=((struct sockaddr_in *)(d->addresses->netmask))->sin_addr.S_un.S_addr;
else
/* If the interface is without addresses we suppose to be in a C class network */
netmask=0xffffff;
//compile the filter
if(pcap_compile(adhandle, &fcode, packet_filter, 1, netmask) <0 ){
fprintf(stderr,"\nUnable to compile the packet filter. Check the syntax.\n");
/* Free the device list */
pcap_freealldevs(alldevs);
return -1;
}
//set the filter
if(pcap_setfilter(adhandle, &fcode)<0){
fprintf(stderr,"\nError setting the filter.\n");
/* Free the device list */
pcap_freealldevs(alldevs);
return -1;
}
printf("\nlistening on %s...\n", d->description);
/* At this point, we don't need any more the device list. Free it */
pcap_freealldevs(alldevs);
/* start the capture */
pcap_loop(adhandle, 0, packet_handler, NULL);
return 0;
}
/* Callback function invoked by libpcap for every incoming packet */
void packet_handler(u_char *param, const struct pcap_pkthdr *header, const u_char *pkt_data)
{
struct tm *ltime;
char timestr[16];
ip_header *ih;
udp_header *uh;
u_int ip_len;
/* convert the timestamp to readable format */
ltime=localtime(&header->ts.tv_sec);
strftime( timestr, sizeof timestr, "%H:%M:%S", ltime);
/* print timestamp and length of the packet */
/* retireve the position of the ip header */
ih = (ip_header *) (pkt_data +
14); //length of ethernet header
/* retireve the position of the udp header */
ip_len = (ih->ver_ihl & 0xf) * 4;
uh = (udp_header *) ((u_char*)ih + ip_len);
/* convert from network byte order to host byte order */
printf("%s.%.6d len:%d ", timestr, header->ts.tv_usec, header->len);
/* print ip addresses */
printf("%d.%d.%d.%d -> %d.%d.%d.%d\n",
ih->saddr.byte1,
ih->saddr.byte2,
ih->saddr.byte3,
ih->saddr.byte4,
ih->daddr.byte1,
ih->daddr.byte2,
ih->daddr.byte3,
ih->daddr.byte4
);
}
（三）。发包，要在命令行下运行，给与参数：网卡描述符。或者添加代码findalldevs（），那样应很方便。
＃i nclude <stdlib.h>
＃i nclude <stdio.h>
＃i nclude <pcap.h>
void usage();
void main(int argc, char **argv) {
pcap_t *fp;
char error[PCAP_ERRBUF_SIZE];
u_char packet[100];
int i;
/* Check the validity of the command line */
if (argc != 2)
{
printf("usage: %s inerface", argv[0]);
return;
}
/* Open the output adapter */
if((fp = pcap_open_live(argv[1], 100, 1, 1000, error) ) == NULL)
{
fprintf(stderr,"\nError opening adapter: %s\n", error);
return;
}
/* Supposing to be on ethernet, set mac destination to 1:1:1:1:1:1 */
packet[0]=1;
packet[1]=1;
packet[2]=1;
packet[3]=1;
packet[4]=1;
packet[5]=1;
/* set mac source to 2:2:2:2:2:2 */
packet[6]=2;
packet[7]=2;
packet[8]=2;
packet[9]=2;
packet[10]=2;
packet[11]=2;
/* Fill the rest of the packet */
for(i=12;i<100;i++){
packet[i]=i%256;
}
/* Send down the packet */
pcap_sendpacket(fp,
packet,
100);
return;
}
0 评论:
发表评论